This CM10 is engineered for supersonic 308 Winchester and compatible 7.62×51 NATO ammunition. It will not reliably cycle subsonic ammunition. Shooters seeking a semi-automatic system developed specifically for heavy subsonic loads should select the CM10 308 Subsonic AR10.
Photographs may show optics, suppressors or other accessories that are not included unless specifically listed.
CM10 308 Compact AR10
The CM10 308 Compact AR10 places supersonic 308 Winchester performance into a short, maneuverable large-frame semi-automatic firearm. Its 12.5-inch barrel, billet receiver set, adjustable operating system and free-floating handguard create a compact system for field use, vehicle carry and suppressed or unsuppressed shooting.
The preferred configuration is the SBR with a black B5 Systems Bravo stock and adjustable carbine receiver extension. A pistol configuration is also available with a stabilizing brace. Both configurations retain the same listed weight and dimensional ranges.
This firearm accepts conventional dual-feed LR/SR-pattern magazines. It is chambered for 308 Winchester and can also fire compatible 7.62×51 NATO ammunition. Compare CM10 rifles, CM7S bolt-action firearms, ammunition and supporting components in District 308.
Supersonic Ammunition and Operating System
This CM10 is configured around the pressure and dwell time produced by supersonic ammunition. Its carbine-length gas system, adjustable gas block, adjustable AR10 buffer and low-mass bolt carrier group allow the operating system to be tuned for the selected ammunition and suppressor configuration.
Subsonic 308 Winchester produces substantially less operating pressure and will not reliably cycle this firearm. The separate CM10 SUBSONIC uses a different barrel, twist rate, handguard and operating configuration developed specifically for heavy subsonic ammunition.
CM10 Billet Receiver Set
- SR25-pattern receiver architecture with DPMS high-profile component compatibility
- CNC-machined from 7075-T6 billet aluminum
- Lightened fire-control housing and magazine-well surfaces
- Lightening cuts on the upper receiver
- Upper receiver without a forward assist
- Machined and flared magazine well
- Integral trigger guard
- Ambidextrous fire and safe markings
- Black Tungsten Cerakote
Ambidextrous Lower Controls
- CM ambidextrous safety selector
- CM ambidextrous magazine release
- CM10 ambidextrous bolt release
- CM10 pivot and takedown pins
- B5 Systems grip in black
SBR and Pistol Configurations
Preferred SBR Configuration
- B5 Systems Bravo stock in black
- Carbine receiver extension with multiple adjustment positions
- Adjustable AR10 buffer system
- Requires applicable NFA transfer and approval
Pistol Configuration
- Adjustable pistol brace
- Adjustable AR10 buffer system
- Transferred and configured in accordance with applicable federal, state and local requirements
The SBR and pistol configurations have the same listed weight, overall-length range and length-of-pull range.
TriggerTech AR Duty Trigger
The CM10 308 Compact AR10 includes a TriggerTech AR Duty trigger with a choice of single-stage or two-stage operation. Its zero-creep release provides a clean, predictable break with minimal overtravel. Most customers select the single-stage trigger, although the two-stage option remains available for shooters who prefer a defined first stage.
CM10 Bolt Carrier Group
- 9310 steel bolt
- High-pressure tested bolt
- Magnetic-particle-inspected bolt
- Shot-peened bolt
- Nitride-coated bolt, carrier and gas key
- Hardened gas key
- Grade 8 hardened gas-key fasteners
- Properly staked gas key
- Tool-steel extractor
- T.E.A. extractor spring
- Black extractor insert
- Crane O-ring
Charging Handle and Gas System
- CM10 Warhammer ambidextrous charging handle manufactured in collaboration with Breek Arms
- 7075 aluminum charging-handle construction
- Carbine-length melonite gas tube
- Superlative Arms .750-inch adjustable gas block with melonite finish
- Adjustable AR10 buffer
SLR ZRO Free-Floating Handguard
The 11.3-inch SLR ZRO handguard provides a rigid free-floating interface around the 12.5-inch barrel while leaving the muzzle accessible for a suppressor mount or muzzle device.
- 11.3-inch handguard length
- 7075 aluminum barrel nut
- 6061 aluminum handguard
- 1.4-inch internal diameter
- Full-length Picatinny top rail
- M-Lok attachment surfaces along the sides and bottom
- Integrated QD sling sockets at the 3- and 9-o’clock positions
- Free-floating design
- Black Tungsten Cerakote
- B5 Systems rail covers in black
12.5-Inch 308 Winchester Barrel
- Chamber: 308 Winchester
- Length: 12.5 inches
- Material: CrMoV
- Profile: Tactical Government
- Finish: QPQ corrosion-resistant finish
- Twist rate: 1:10
- Gas-system length: Carbine
- Gas-block journal: .750 inch
- Muzzle thread: 5/8×24
Muzzle Device and Suppressor Use
The 5/8×24 muzzle thread supports common 308-caliber muzzle devices and suppressor mounts. Available mounting configurations may vary by current component availability and price. Contact CM before ordering if a particular suppressor interface is required.
An adjustable gas block and adjustable buffer allow the firearm to be tuned for suppressed supersonic operation. A flow-through suppressor can be appropriate for this supersonic CM10 because reducing excess backpressure and receiver gas can improve the shooting experience. This differs from the CM10 SUBSONIC, which needs the backpressure of an enclosed suppressor to cycle. See the 308 suppressor guide for the complete explanation.
Magazine
- One 20-round Magpul PMAG 7.62 LR/SR GEN M3 in black, where permitted
- Conventional dual-feed LR/SR magazine pattern
- Compatible lower-capacity LR/SR magazines may be used where required
Verified Dimensions
- Weight: 7.5 lb without optic, suppressor or other accessories
- Overall length: 29.25–32.5 inches
- Length of pull: 11.75–15 inches
Dimensions displayed elsewhere for shipping are packaged shipping dimensions and do not describe the firearm itself.
308 Compact AR10 FAQ
Will this CM10 cycle subsonic 308 ammunition?
No. This CM10 308 Compact AR10 is configured for the operating pressure produced by supersonic 308 Winchester and 7.62×51 NATO ammunition. Choose the CM10 SUBSONIC when reliable semi-automatic operation with compatible heavy subsonic loads is required.
Can the CM10 fire both 308 Winchester and 7.62×51 NATO?
Yes. CM’s 308 Winchester firearms can use compatible 7.62×51 NATO ammunition. Always confirm that the ammunition is commercially manufactured, undamaged and appropriate for the firearm before use.
What makes this a compact AR10?
The 12.5-inch barrel and 11.3-inch handguard reduce the firearm’s overall length while retaining the power and dual-feed magazine system of a large-frame 308 platform. Its adjustable stock or brace allows the firearm to remain compact for transport and extend for a proper shooting position.
What is the difference between the SBR and pistol selections?
The preferred SBR uses a B5 Systems Bravo stock on an adjustable carbine receiver extension. The pistol version uses a stabilizing brace. The configurations retain the same listed weight and dimensional ranges, but the SBR requires the applicable NFA transfer and approval.
What magazine pattern does this firearm use?
The CM10 uses conventional dual-feed LR/SR-pattern 308 magazines. It does not use the AICS-pattern magazine found in the CM7S bolt-action platform.
Can this 308 Compact AR10 be suppressed?
Yes. The barrel has 5/8×24 muzzle threads, and the adjustable gas block and buffer allow the operating system to be tuned for suppressed supersonic ammunition. Follow the suppressor manufacturer’s caliber, barrel-length and mounting requirements.
Warranty
This complete firearm carries CM’s limited lifetime warranty for the original purchaser. Coverage applies to functional performance in the firearm’s original CM configuration and is subject to the complete warranty terms.
Compact 308 Winchester Performance
The 308 Compact AR10 combines a 12.5-inch QPQ-finished CrMoV barrel, Black Tungsten billet receiver set, adjustable operating system, low-mass carrier and free-floating SLR handguard in a maneuverable large-frame firearm. Select the preferred SBR configuration for the B5 Bravo stock or choose the pistol configuration where appropriate. Explore the complete 308 Winchester family in District 308.
Reviews
There are no reviews yet.