Chattahoochee Munitions manufactures the CM15 6.5 Grendel DMR, a complete factory designated marksman rifle on the AR15 platform. This FDE Metallic configuration uses an 18-inch straight-fluted 416R stainless barrel with a 1:8 twist, a rifle-length gas system, a 15-inch free-float M-LOK handguard, and a TriggerTech AR15 Duty trigger, at 6 lb 12 oz with an unloaded magazine.
Explore the full Chattahoochee Munitions 6.5 Grendel lineup at Grendel’s Lair, and read the 6.5 Grendel guide for ballistic coefficient and retained-velocity fundamentals.
What Makes a 6.5 Grendel DMR
A designated marksman rifle extends a semi-automatic platform for precise shots at longer distances. This 6.5 Grendel DMR pairs the cartridge’s efficient, high-ballistic-coefficient bullets with an 18-inch barrel and rifle-length gas system for smooth cycling. The free-floated 15-inch handguard keeps pressure off the barrel, the full-length top Picatinny rail supports an optic and night vision or thermal devices, and the two-stage TriggerTech option gives a precise break.
Compare barrel lengths in the 6.5 Grendel barrel length comparison, and see 6.5 Grendel vs 6mm ARC for how the Grendel compares with another efficient AR15 marksman cartridge.
Barrel and Gas System
The 18-inch 416R stainless steel barrel is straight-fluted, finished in E100 Blackout Cerakote, and cut with a 1:8 twist that stabilizes the common range of 6.5 Grendel bullets. It runs a rifle-length gas system with a .750-inch gas journal, a Melonite gas tube, and a Superlative Arms adjustable gas block. A shouldered crown and 5/8×24 threads accept a muzzle device or suppressor. Because the CM15 is gas operated, Chattahoochee Munitions recommends a flow-through suppressor to limit back pressure, and the adjustable gas block and Odin adjustable buffer help tune the rifle for suppressed use.
Receivers, Bolt, and Trigger
CNC-machined 7075-T6 billet receivers carry an integral trigger guard, a flared magazine well, and ambidextrous safety, magazine release, and bolt release. The CM15 Low Mass bolt carrier group uses a 9310 steel bolt manufactured to the Grendel Type II specification, with nitride-coated bolt, carrier, and gas key. Fire control is a TriggerTech AR15 Duty trigger in single-stage straight, single-stage curved, or two-stage straight, each at 3.5 lb total pull.
FDE Metallic Cerakote Finish
This 6.5 Grendel DMR is finished in FDE Metallic Cerakote on the upper and lower receivers, buffer tube, and handguard, with a Coyote B5 Systems Bravo stock, grip, and rail covers. Every CM15 18-inch 6.5 Grendel shares the same mechanical specifications; only the finish differs. One 10-round 6.5 Grendel AR15 magazine is included.
CM15 18-Inch 6.5 Grendel Specifications
- Manufacturer: Chattahoochee Munitions
- Platform: CM15 AR15-pattern semi-automatic rifle
- Chambering: 6.5 Grendel
- Barrel: 18-inch 416R stainless steel, straight-fluted, E100 Blackout Cerakote
- Twist rate: 1:8
- Muzzle: 5/8×24 threads, shouldered crown
- Gas system: Rifle-length, .750-inch gas journal, Melonite gas tube
- Gas block: Superlative Arms adjustable
- Buffer: Odin adjustable AR15 buffer, CM mil-spec buffer tube, QD endplate
- Bolt carrier group: CM15 Low Mass BCG; 9310 steel bolt manufactured to the Grendel Type II specification, HPT/MPI tested; nitride bolt, carrier, and gas key; tool-steel extractor
- Receivers: CNC-machined 7075-T6 billet upper and lower, integral trigger guard, flared magazine well
- Controls: Ambidextrous safety, magazine release, and bolt release
- Charging handle: CM15 ambidextrous 7075 charging handle, made in collaboration with Breek Arms
- Trigger: TriggerTech AR15 Duty: single-stage straight, single-stage curved, or two-stage straight; 3.5 lb total pull
- Handguard: 15-inch CM15 LWS M-LOK, dual-taper attachment with steel barrel nut, M-LOK sides and bottom, full-length top Picatinny rail, QD sockets at 3 and 9 o’clock
- Stock and grip: B5 Systems Bravo stock, B5 grip and rail covers
- Finish: FDE Metallic Cerakote on the upper and lower receivers, buffer tube, and handguard, with a Coyote B5 Systems stock, grip, and rail covers
- Magazine: One 10-round DURAMAG 6.5 Grendel AR15-pattern magazine
- Weight: 6 lb 12 oz with unloaded magazine, no accessories (listing weight is for shipping)
- Overall length: 35.50–38.75 inches
- Length of pull: 11.00–14.25 inches
Frequently Asked Questions
Who makes a 6.5 Grendel DMR?
Chattahoochee Munitions manufactures the CM15 6.5 Grendel DMR as a complete factory rifle with an 18-inch 1:8 twist 416R stainless barrel, rifle-length gas system, adjustable gas block, 15-inch free-float M-LOK handguard, and TriggerTech AR15 Duty trigger.
What twist rate does the CM15 18-inch 6.5 Grendel use?
A 1:8 twist, which stabilizes the common range of 6.5 Grendel bullets from lighter predator loads to heavier hunting bullets.
What gas system does it use?
A rifle-length gas system with a .750-inch gas journal and a Superlative Arms adjustable gas block.
What magazine does the CM15 6.5 Grendel use?
A 6.5 Grendel AR15-pattern magazine. One 10-round 6.5 Grendel AR15 magazine is included. CM15 and CM7S magazines are not interchangeable.
What suppressor does Chattahoochee Munitions recommend for the CM15?
A flow-through suppressor. The CM15 is gas operated, and a flow-through design limits back pressure so the rifle is easier to tune. Confirm the suppressor is rated for 6.5 Grendel and the barrel length.
What bolt does it use?
A CM15 Low Mass bolt carrier group with a bolt manufactured to the Grendel Type II specification. It is not interchangeable with the CM7S bolt-action bolt.
Does the finish change performance?
No. All CM15 18-inch 6.5 Grendel rifles share the same mechanical specifications; Black Tungsten Cerakote, Cobalt Kinetics Green Cerakote, and FDE Metallic Cerakote differ only in color.
How much does it weigh?
6 lb 12 oz with an unloaded magazine and no accessories. Any heavier listing weight is the shipping weight.
Reviews
There are no reviews yet.