Description

The Raptor is AB Suppressor’s flagship silencer that comes in a variety of lengths/configurations that serve as a solution to the multi-gun and multi-caliber dilemma suppressor owners endure. The Raptor 10 .338/8.6mm uses AB Spiral Technology which is designed to be more efficient than conical baffles. By peeling gases off the bore and sending them into a spin, it effectively burns off the energy rather than trying to stop it. The reduced pressure also creates a much lower tone, making for a better shooting experience.

Each Raptor suppressor connects via the provided Reflex mounting system or flush mount. The Reflex mount allows the suppressor to take advantage of the area around the barrel to significantly increase the blast chamber volume, without adding additional length to the weapon system. You can also utilize the Raptor Adapter to convert the base threads of the suppressor to the industry standard 1.375×24 thread pitch for use with a wide array of QD mounts.

Manufacturer’s Note: AB Suppressor does offer reflex swaps for custom reflex sizes within their capabilities (1″ to 5″, Standard barrel or bull barrel). The Reflex you are looking to swap must be unshot/new condition. Reflex swaps are $50 and can only be done directly through AB Suppressor. Please email Sales@absuppressor.com for more information.

Caliber Options Include:

• .338 Lapua
• .338 Federal
• 338 Weatherby Mag
• .338-378 Weatherby
• .338 Remington Ultra Magnum
• 8.6 Blackout
• TECHNICAL SPECIFICATIONS:

• Length: 7.2″
• Diameter: 1.625″
• Weight: 9.5oz
• Material: Grade 5 Titanium
• Finish: Cerakote
• WHAT’S IN THE BOX:

• AB Suppressor Raptor 10 – .338/8.6mm
• 3″ Bull Barrel Reflex Mount 5/8×24
• 5/8×24 Flush Mount
• Six Pin Tool
• Owners Manual